		/* Copyright 2003-2004 The Apache Software Foundation
		 *
		 * Licensed under the Apache License, Version 2.0 (the "License");
		 * you may not use this file except in compliance with the License.
		 * You may obtain a copy of the License at
		 *
		 *     http://www.apache.org/licenses/LICENSE-2.0
		 *
		 * Unless required by applicable law or agreed to in writing, software
		 * distributed under the License is distributed on an "AS IS" BASIS,
		 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
		 * See the License for the specific language governing permissions and
		 * limitations under the License.
		 */
		/*
		 * FILE:        sha2.c
		 * AUTHOR:      Aaron D. Gifford <me@aarongifford.com>
		 *
		 * A licence was granted to the ASF by Aaron on 4 November 2003.
		 */
		
		#include <string.h>     /* memcpy()/memset() or bcopy()/bzero() */
		#include <assert.h>     /* assert() */
		#include "sha2.h"
		
		/*
		 * ASSERT NOTE:
		 * Some sanity checking code is included using assert().  On my FreeBSD
		 * system, this additional code can be removed by compiling with NDEBUG
		 * defined.  Check your own systems manpage on assert() to see how to
		 * compile WITHOUT the sanity checking code on your system.
		 *
		 * UNROLLED TRANSFORM LOOP NOTE:
		 * You can define SHA2_UNROLL_TRANSFORM to use the unrolled transform
		 * loop version for the hash transform rounds (defined using macros
		 * later in this file).  Either define on the command line, for example:
		 *
		 *   cc -DSHA2_UNROLL_TRANSFORM -o sha2 sha2.c sha2prog.c
		 *
		 * or define below:
		 *
		 *   #define SHA2_UNROLL_TRANSFORM
		 *
		 */
		
		/*** SHA-256/384/512 Machine Architecture Definitions *****************/
		typedef apr_byte_t   sha2_byte;         /* Exactly 1 byte */
		typedef apr_uint32_t sha2_word32;       /* Exactly 4 bytes */
		typedef apr_uint64_t sha2_word64;       /* Exactly 8 bytes */
		
		/*** SHA-256/384/512 Various Length Definitions ***********************/
		/* NOTE: Most of these are in sha2.h */
		#define SHA256_SHORT_BLOCK_LENGTH       (SHA256_BLOCK_LENGTH - 8)
		#define SHA384_SHORT_BLOCK_LENGTH       (SHA384_BLOCK_LENGTH - 16)
		#define SHA512_SHORT_BLOCK_LENGTH       (SHA512_BLOCK_LENGTH - 16)
		
		
		/*** ENDIAN REVERSAL MACROS *******************************************/
		#if !APR_IS_BIGENDIAN
		#define REVERSE32(w,x)  { \
		        sha2_word32 tmp = (w); \
		        tmp = (tmp >> 16) | (tmp << 16); \
		        (x) = ((tmp & 0xff00ff00UL) >> 8) | ((tmp & 0x00ff00ffUL) << 8); \
		}
		#define REVERSE64(w,x)  { \
		        sha2_word64 tmp = (w); \
		        tmp = (tmp >> 32) | (tmp << 32); \
		        tmp = ((tmp & APR_UINT64_C(0xff00ff00ff00ff00)) >> 8) | \
		              ((tmp & APR_UINT64_C(0x00ff00ff00ff00ff)) << 8); \
		        (x) = ((tmp & APR_UINT64_C(0xffff0000ffff0000)) >> 16) | \
		              ((tmp & APR_UINT64_C(0x0000ffff0000ffff)) << 16); \
		}
		#endif /* !APR_IS_BIGENDIAN */
		
		/*
		 * Macro for incrementally adding the unsigned 64-bit integer n to the
		 * unsigned 128-bit integer (represented using a two-element array of
		 * 64-bit words):
		 */
		#define ADDINC128(w,n)  { \
		        (w)[0] += (sha2_word64)(n); \
		        if ((w)[0] < (n)) { \
		                (w)[1]++; \
		        } \
		}
		
		/*
		 * Macros for copying blocks of memory and for zeroing out ranges
		 * of memory.  Using these macros makes it easy to switch from
		 * using memset()/memcpy() and using bzero()/bcopy().
		 *
		 * Please define either SHA2_USE_MEMSET_MEMCPY or define
		 * SHA2_USE_BZERO_BCOPY depending on which function set you
		 * choose to use:
		 */
		#if !defined(SHA2_USE_MEMSET_MEMCPY) && !defined(SHA2_USE_BZERO_BCOPY)
		/* Default to memset()/memcpy() if no option is specified */
		#define SHA2_USE_MEMSET_MEMCPY  1
		#endif
		#if defined(SHA2_USE_MEMSET_MEMCPY) && defined(SHA2_USE_BZERO_BCOPY)
		/* Abort with an error if BOTH options are defined */
		#error Define either SHA2_USE_MEMSET_MEMCPY or SHA2_USE_BZERO_BCOPY, not both!
		#endif
		
		#ifdef SHA2_USE_MEMSET_MEMCPY
		#define MEMSET_BZERO(p,l)       memset((p), 0, (l))
		#define MEMCPY_BCOPY(d,s,l)     memcpy((d), (s), (l))
		#endif
		#ifdef SHA2_USE_BZERO_BCOPY
		#define MEMSET_BZERO(p,l)       bzero((p), (l))
		#define MEMCPY_BCOPY(d,s,l)     bcopy((s), (d), (l))
		#endif
		
		
		/*** THE SIX LOGICAL FUNCTIONS ****************************************/
		/*
		 * Bit shifting and rotation (used by the six SHA-XYZ logical functions:
		 *
		 *   NOTE:  The naming of R and S appears backwards here (R is a SHIFT and
		 *   S is a ROTATION) because the SHA-256/384/512 description document
		 *   (see http://csrc.nist.gov/cryptval/shs/sha256-384-512.pdf) uses this
		 *   same "backwards" definition.
		 */
		/* Shift-right (used in SHA-256, SHA-384, and SHA-512): */
		#define R(b,x)          ((x) >> (b))
		/* 32-bit Rotate-right (used in SHA-256): */
		#define S32(b,x)        (((x) >> (b)) | ((x) << (32 - (b))))
		/* 64-bit Rotate-right (used in SHA-384 and SHA-512): */
		#define S64(b,x)        (((x) >> (b)) | ((x) << (64 - (b))))
		
		/* Two of six logical functions used in SHA-256, SHA-384, and SHA-512: */
		#define Ch(x,y,z)       (((x) & (y)) ^ ((~(x)) & (z)))
		#define Maj(x,y,z)      (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z)))
		
		/* Four of six logical functions used in SHA-256: */
		#define Sigma0_256(x)   (S32(2,  (x)) ^ S32(13, (x)) ^ S32(22, (x)))
		#define Sigma1_256(x)   (S32(6,  (x)) ^ S32(11, (x)) ^ S32(25, (x)))
		#define sigma0_256(x)   (S32(7,  (x)) ^ S32(18, (x)) ^ R(3 ,   (x)))
		#define sigma1_256(x)   (S32(17, (x)) ^ S32(19, (x)) ^ R(10,   (x)))
		
		/* Four of six logical functions used in SHA-384 and SHA-512: */
		#define Sigma0_512(x)   (S64(28, (x)) ^ S64(34, (x)) ^ S64(39, (x)))
		#define Sigma1_512(x)   (S64(14, (x)) ^ S64(18, (x)) ^ S64(41, (x)))
		#define sigma0_512(x)   (S64( 1, (x)) ^ S64( 8, (x)) ^ R( 7,   (x)))
		#define sigma1_512(x)   (S64(19, (x)) ^ S64(61, (x)) ^ R( 6,   (x)))
		
		/*** INTERNAL FUNCTION PROTOTYPES *************************************/
		/* NOTE: These should not be accessed directly from outside this
		 * library -- they are intended for private internal visibility/use
		 * only.
		 */
		void SHA512_Last(SHA512_CTX*);
		void SHA256_Transform(SHA256_CTX*, const sha2_word32*);
		void SHA512_Transform(SHA512_CTX*, const sha2_word64*);
		
		
		/*** SHA-XYZ INITIAL HASH VALUES AND CONSTANTS ************************/
		/* Hash constant words K for SHA-256: */
		const static sha2_word32 K256[64] = {
		        0x428a2f98UL, 0x71374491UL, 0xb5c0fbcfUL, 0xe9b5dba5UL,
		        0x3956c25bUL, 0x59f111f1UL, 0x923f82a4UL, 0xab1c5ed5UL,
		        0xd807aa98UL, 0x12835b01UL, 0x243185beUL, 0x550c7dc3UL,
		        0x72be5d74UL, 0x80deb1feUL, 0x9bdc06a7UL, 0xc19bf174UL,
		        0xe49b69c1UL, 0xefbe4786UL, 0x0fc19dc6UL, 0x240ca1ccUL,
		        0x2de92c6fUL, 0x4a7484aaUL, 0x5cb0a9dcUL, 0x76f988daUL,
		        0x983e5152UL, 0xa831c66dUL, 0xb00327c8UL, 0xbf597fc7UL,
		        0xc6e00bf3UL, 0xd5a79147UL, 0x06ca6351UL, 0x14292967UL,
		        0x27b70a85UL, 0x2e1b2138UL, 0x4d2c6dfcUL, 0x53380d13UL,
		        0x650a7354UL, 0x766a0abbUL, 0x81c2c92eUL, 0x92722c85UL,
		        0xa2bfe8a1UL, 0xa81a664bUL, 0xc24b8b70UL, 0xc76c51a3UL,
		        0xd192e819UL, 0xd6990624UL, 0xf40e3585UL, 0x106aa070UL,
		        0x19a4c116UL, 0x1e376c08UL, 0x2748774cUL, 0x34b0bcb5UL,
		        0x391c0cb3UL, 0x4ed8aa4aUL, 0x5b9cca4fUL, 0x682e6ff3UL,
		        0x748f82eeUL, 0x78a5636fUL, 0x84c87814UL, 0x8cc70208UL,
		        0x90befffaUL, 0xa4506cebUL, 0xbef9a3f7UL, 0xc67178f2UL
		};
		
		/* Initial hash value H for SHA-256: */
		const static sha2_word32 sha256_initial_hash_value[8] = {
		        0x6a09e667UL,
		        0xbb67ae85UL,
		        0x3c6ef372UL,
		        0xa54ff53aUL,
		        0x510e527fUL,
		        0x9b05688cUL,
		        0x1f83d9abUL,
		        0x5be0cd19UL
		};
		
		/* Hash constant words K for SHA-384 and SHA-512: */
		const static sha2_word64 K512[80] = {
		    APR_UINT64_C(0x428a2f98d728ae22), APR_UINT64_C(0x7137449123ef65cd),
		    APR_UINT64_C(0xb5c0fbcfec4d3b2f), APR_UINT64_C(0xe9b5dba58189dbbc),
		    APR_UINT64_C(0x3956c25bf348b538), APR_UINT64_C(0x59f111f1b605d019),
		    APR_UINT64_C(0x923f82a4af194f9b), APR_UINT64_C(0xab1c5ed5da6d8118),
		    APR_UINT64_C(0xd807aa98a3030242), APR_UINT64_C(0x12835b0145706fbe),
		    APR_UINT64_C(0x243185be4ee4b28c), APR_UINT64_C(0x550c7dc3d5ffb4e2),
		    APR_UINT64_C(0x72be5d74f27b896f), APR_UINT64_C(0x80deb1fe3b1696b1),
		    APR_UINT64_C(0x9bdc06a725c71235), APR_UINT64_C(0xc19bf174cf692694),
		    APR_UINT64_C(0xe49b69c19ef14ad2), APR_UINT64_C(0xefbe4786384f25e3),
		    APR_UINT64_C(0x0fc19dc68b8cd5b5), APR_UINT64_C(0x240ca1cc77ac9c65),
		    APR_UINT64_C(0x2de92c6f592b0275), APR_UINT64_C(0x4a7484aa6ea6e483),
		    APR_UINT64_C(0x5cb0a9dcbd41fbd4), APR_UINT64_C(0x76f988da831153b5),
		    APR_UINT64_C(0x983e5152ee66dfab), APR_UINT64_C(0xa831c66d2db43210),
		    APR_UINT64_C(0xb00327c898fb213f), APR_UINT64_C(0xbf597fc7beef0ee4),
		    APR_UINT64_C(0xc6e00bf33da88fc2), APR_UINT64_C(0xd5a79147930aa725),
		    APR_UINT64_C(0x06ca6351e003826f), APR_UINT64_C(0x142929670a0e6e70),
		    APR_UINT64_C(0x27b70a8546d22ffc), APR_UINT64_C(0x2e1b21385c26c926),
		    APR_UINT64_C(0x4d2c6dfc5ac42aed), APR_UINT64_C(0x53380d139d95b3df),
		    APR_UINT64_C(0x650a73548baf63de), APR_UINT64_C(0x766a0abb3c77b2a8),
		    APR_UINT64_C(0x81c2c92e47edaee6), APR_UINT64_C(0x92722c851482353b),
		    APR_UINT64_C(0xa2bfe8a14cf10364), APR_UINT64_C(0xa81a664bbc423001),
		    APR_UINT64_C(0xc24b8b70d0f89791), APR_UINT64_C(0xc76c51a30654be30),
		    APR_UINT64_C(0xd192e819d6ef5218), APR_UINT64_C(0xd69906245565a910),
		    APR_UINT64_C(0xf40e35855771202a), APR_UINT64_C(0x106aa07032bbd1b8),
		    APR_UINT64_C(0x19a4c116b8d2d0c8), APR_UINT64_C(0x1e376c085141ab53),
		    APR_UINT64_C(0x2748774cdf8eeb99), APR_UINT64_C(0x34b0bcb5e19b48a8),
		    APR_UINT64_C(0x391c0cb3c5c95a63), APR_UINT64_C(0x4ed8aa4ae3418acb),
		    APR_UINT64_C(0x5b9cca4f7763e373), APR_UINT64_C(0x682e6ff3d6b2b8a3),
		    APR_UINT64_C(0x748f82ee5defb2fc), APR_UINT64_C(0x78a5636f43172f60),
		    APR_UINT64_C(0x84c87814a1f0ab72), APR_UINT64_C(0x8cc702081a6439ec),
		    APR_UINT64_C(0x90befffa23631e28), APR_UINT64_C(0xa4506cebde82bde9),
		    APR_UINT64_C(0xbef9a3f7b2c67915), APR_UINT64_C(0xc67178f2e372532b),
		    APR_UINT64_C(0xca273eceea26619c), APR_UINT64_C(0xd186b8c721c0c207),
		    APR_UINT64_C(0xeada7dd6cde0eb1e), APR_UINT64_C(0xf57d4f7fee6ed178),
		    APR_UINT64_C(0x06f067aa72176fba), APR_UINT64_C(0x0a637dc5a2c898a6),
		    APR_UINT64_C(0x113f9804bef90dae), APR_UINT64_C(0x1b710b35131c471b),
		    APR_UINT64_C(0x28db77f523047d84), APR_UINT64_C(0x32caab7b40c72493),
		    APR_UINT64_C(0x3c9ebe0a15c9bebc), APR_UINT64_C(0x431d67c49c100d4c),
		    APR_UINT64_C(0x4cc5d4becb3e42b6), APR_UINT64_C(0x597f299cfc657e2a),
		    APR_UINT64_C(0x5fcb6fab3ad6faec), APR_UINT64_C(0x6c44198c4a475817)
		};
		
		/* Initial hash value H for SHA-384 */
		const static sha2_word64 sha384_initial_hash_value[8] = {
		    APR_UINT64_C(0xcbbb9d5dc1059ed8),
		    APR_UINT64_C(0x629a292a367cd507),
		    APR_UINT64_C(0x9159015a3070dd17),
		    APR_UINT64_C(0x152fecd8f70e5939),
		    APR_UINT64_C(0x67332667ffc00b31),
		    APR_UINT64_C(0x8eb44a8768581511),
		    APR_UINT64_C(0xdb0c2e0d64f98fa7),
		    APR_UINT64_C(0x47b5481dbefa4fa4)
		};
		
		/* Initial hash value H for SHA-512 */
		const static sha2_word64 sha512_initial_hash_value[8] = {
		    APR_UINT64_C(0x6a09e667f3bcc908),
		    APR_UINT64_C(0xbb67ae8584caa73b),
		    APR_UINT64_C(0x3c6ef372fe94f82b),
		    APR_UINT64_C(0xa54ff53a5f1d36f1),
		    APR_UINT64_C(0x510e527fade682d1),
		    APR_UINT64_C(0x9b05688c2b3e6c1f),
		    APR_UINT64_C(0x1f83d9abfb41bd6b),
		    APR_UINT64_C(0x5be0cd19137e2179)
		};
		
		/*
		 * Constant used by SHA256/384/512_End() functions for converting the
		 * digest to a readable hexadecimal character string:
		 */
		static const char *sha2_hex_digits = "0123456789abcdef";
		
		
		/*** SHA-256: *********************************************************/
       36645    void SHA256_Init(SHA256_CTX* context) {
       36645            if (context == (SHA256_CTX*)0) {
      ######                    return;
		        }
       36645            MEMCPY_BCOPY(context->state, sha256_initial_hash_value, SHA256_DIGEST_LENGTH);
       36645            MEMSET_BZERO(context->buffer, SHA256_BLOCK_LENGTH);
       36645            context->bitcount = 0;
		}
		
		#ifdef SHA2_UNROLL_TRANSFORM
		
		/* Unrolled SHA-256 round macros: */
		
		#if !APR_IS_BIGENDIAN
		
		#define ROUND256_0_TO_15(a,b,c,d,e,f,g,h)       \
		        REVERSE32(*data++, W256[j]); \
		        T1 = (h) + Sigma1_256(e) + Ch((e), (f), (g)) + \
		             K256[j] + W256[j]; \
		        (d) += T1; \
		        (h) = T1 + Sigma0_256(a) + Maj((a), (b), (c)); \
		        j++
		
		
		#else /* APR_IS_BIGENDIAN */
		
		#define ROUND256_0_TO_15(a,b,c,d,e,f,g,h)       \
		        T1 = (h) + Sigma1_256(e) + Ch((e), (f), (g)) + \
		             K256[j] + (W256[j] = *data++); \
		        (d) += T1; \
		        (h) = T1 + Sigma0_256(a) + Maj((a), (b), (c)); \
		        j++
		
		#endif /* APR_IS_BIGENDIAN */
		
		#define ROUND256(a,b,c,d,e,f,g,h)       \
		        s0 = W256[(j+1)&0x0f]; \
		        s0 = sigma0_256(s0); \
		        s1 = W256[(j+14)&0x0f]; \
		        s1 = sigma1_256(s1); \
		        T1 = (h) + Sigma1_256(e) + Ch((e), (f), (g)) + K256[j] + \
		             (W256[j&0x0f] += s1 + W256[(j+9)&0x0f] + s0); \
		        (d) += T1; \
		        (h) = T1 + Sigma0_256(a) + Maj((a), (b), (c)); \
		        j++
		
		void SHA256_Transform(SHA256_CTX* context, const sha2_word32* data) {
		        sha2_word32     a, b, c, d, e, f, g, h, s0, s1;
		        sha2_word32     T1, *W256;
		        int             j;
		
		        W256 = (sha2_word32*)context->buffer;
		
		        /* Initialize registers with the prev. intermediate value */
		        a = context->state[0];
		        b = context->state[1];
		        c = context->state[2];
		        d = context->state[3];
		        e = context->state[4];
		        f = context->state[5];
		        g = context->state[6];
		        h = context->state[7];
		
		        j = 0;
		        do {
		                /* Rounds 0 to 15 (unrolled): */
		                ROUND256_0_TO_15(a,b,c,d,e,f,g,h);
		                ROUND256_0_TO_15(h,a,b,c,d,e,f,g);
		                ROUND256_0_TO_15(g,h,a,b,c,d,e,f);
		                ROUND256_0_TO_15(f,g,h,a,b,c,d,e);
		                ROUND256_0_TO_15(e,f,g,h,a,b,c,d);
		                ROUND256_0_TO_15(d,e,f,g,h,a,b,c);
		                ROUND256_0_TO_15(c,d,e,f,g,h,a,b);
		                ROUND256_0_TO_15(b,c,d,e,f,g,h,a);
		        } while (j < 16);
		
		        /* Now for the remaining rounds to 64: */
		        do {
		                ROUND256(a,b,c,d,e,f,g,h);
		                ROUND256(h,a,b,c,d,e,f,g);
		                ROUND256(g,h,a,b,c,d,e,f);
		                ROUND256(f,g,h,a,b,c,d,e);
		                ROUND256(e,f,g,h,a,b,c,d);
		                ROUND256(d,e,f,g,h,a,b,c);
		                ROUND256(c,d,e,f,g,h,a,b);
		                ROUND256(b,c,d,e,f,g,h,a);
		        } while (j < 64);
		
		        /* Compute the current intermediate hash value */
		        context->state[0] += a;
		        context->state[1] += b;
		        context->state[2] += c;
		        context->state[3] += d;
		        context->state[4] += e;
		        context->state[5] += f;
		        context->state[6] += g;
		        context->state[7] += h;
		
		        /* Clean up */
		        a = b = c = d = e = f = g = h = T1 = 0;
		}
		
		#else /* SHA2_UNROLL_TRANSFORM */
		
       76607    void SHA256_Transform(SHA256_CTX* context, const sha2_word32* data) {
       76607            sha2_word32     a, b, c, d, e, f, g, h, s0, s1;
       76607            sha2_word32     T1, T2, *W256;
       76607            int             j;
		
       76607            W256 = (sha2_word32*)context->buffer;
		
		        /* Initialize registers with the prev. intermediate value */
       76607            a = context->state[0];
       76607            b = context->state[1];
       76607            c = context->state[2];
       76607            d = context->state[3];
       76607            e = context->state[4];
       76607            f = context->state[5];
       76607            g = context->state[6];
       76607            h = context->state[7];
		
       76607            j = 0;
     1225712            do {
		#if !APR_IS_BIGENDIAN
		                /* Copy data while converting to host byte order */
     1225712                    REVERSE32(*data++,W256[j]);
		                /* Apply the SHA-256 compression function to update a..h */
     1225712                    T1 = h + Sigma1_256(e) + Ch(e, f, g) + K256[j] + W256[j];
		#else /* APR_IS_BIGENDIAN */
		                /* Apply the SHA-256 compression function to update a..h with copy */
		                T1 = h + Sigma1_256(e) + Ch(e, f, g) + K256[j] + (W256[j] = *data++);
		#endif /* APR_IS_BIGENDIAN */
     1225712                    T2 = Sigma0_256(a) + Maj(a, b, c);
     1225712                    h = g;
     1225712                    g = f;
     1225712                    f = e;
     1225712                    e = d + T1;
     1225712                    d = c;
     1225712                    c = b;
     1225712                    b = a;
     1225712                    a = T1 + T2;
		
     1225712                    j++;
     1225712            } while (j < 16);
		
     3677136            do {
		                /* Part of the message block expansion: */
     3677136                    s0 = W256[(j+1)&0x0f];
     3677136                    s0 = sigma0_256(s0);
     3677136                    s1 = W256[(j+14)&0x0f]; 
     3677136                    s1 = sigma1_256(s1);
		
		                /* Apply the SHA-256 compression function to update a..h */
     3677136                    T1 = h + Sigma1_256(e) + Ch(e, f, g) + K256[j] + 
		                     (W256[j&0x0f] += s1 + W256[(j+9)&0x0f] + s0);
     3677136                    T2 = Sigma0_256(a) + Maj(a, b, c);
     3677136                    h = g;
     3677136                    g = f;
     3677136                    f = e;
     3677136                    e = d + T1;
     3677136                    d = c;
     3677136                    c = b;
     3677136                    b = a;
     3677136                    a = T1 + T2;
		
     3677136                    j++;
     3677136            } while (j < 64);
		
		        /* Compute the current intermediate hash value */
       76607            context->state[0] += a;
       76607            context->state[1] += b;
       76607            context->state[2] += c;
       76607            context->state[3] += d;
       76607            context->state[4] += e;
       76607            context->state[5] += f;
       76607            context->state[6] += g;
       76607            context->state[7] += h;
		
		        /* Clean up */
       76607            a = b = c = d = e = f = g = h = T1 = T2 = 0;
		}
		
		#endif /* SHA2_UNROLL_TRANSFORM */
		
       37992    void SHA256_Update(SHA256_CTX* context, const sha2_byte *data, size_t len) {
       37992            unsigned int    freespace, usedspace;
		
       37992            if (len == 0) {
		                /* Calling with no data is valid - we do nothing */
      ######                    return;
		        }
		
		        /* Sanity check: */
       37992            assert(context != (SHA256_CTX*)0 && data != (sha2_byte*)0);
		
       37992            usedspace = (context->bitcount >> 3) % SHA256_BLOCK_LENGTH;
       37992            if (usedspace > 0) {
		                /* Calculate how much free space is available in the buffer */
      ######                    freespace = SHA256_BLOCK_LENGTH - usedspace;
		
      ######                    if (len >= freespace) {
		                        /* Fill the buffer completely and process it */
      ######                            MEMCPY_BCOPY(&context->buffer[usedspace], data, freespace);
      ######                            context->bitcount += freespace << 3;
      ######                            len -= freespace;
      ######                            data += freespace;
      ######                            SHA256_Transform(context, (sha2_word32*)context->buffer);
		                } else {
		                        /* The buffer is not yet full */
      ######                            MEMCPY_BCOPY(&context->buffer[usedspace], data, len);
      ######                            context->bitcount += len << 3;
		                        /* Clean up: */
      ######                            usedspace = freespace = 0;
      ######                            return;
		                }
		        }
       77954            while (len >= SHA256_BLOCK_LENGTH) {
		                /* Process as many complete blocks as we can */
       39962                    SHA256_Transform(context, (sha2_word32*)data);
       39962                    context->bitcount += SHA256_BLOCK_LENGTH << 3;
       39962                    len -= SHA256_BLOCK_LENGTH;
       39962                    data += SHA256_BLOCK_LENGTH;
		        }
       37992            if (len > 0) {
		                /* There's left-overs, so save 'em */
          26                    MEMCPY_BCOPY(context->buffer, data, len);
          26                    context->bitcount += len << 3;
		        }
		        /* Clean up: */
       37992            usedspace = freespace = 0;
		}
		
       36645    void SHA256_Final(sha2_byte digest[], SHA256_CTX* context) {
       36645            sha2_word32     *d = (sha2_word32*)digest;
       36645            unsigned int    usedspace;
		
		        /* Sanity check: */
       36645            assert(context != (SHA256_CTX*)0);
		
		        /* If no digest buffer is passed, we don't bother doing this: */
       36645            if (digest != (sha2_byte*)0) {
       36645                    usedspace = (context->bitcount >> 3) % SHA256_BLOCK_LENGTH;
		#if !APR_IS_BIGENDIAN
		                /* Convert FROM host byte order */
       36645                    REVERSE64(context->bitcount,context->bitcount);
		#endif
       36645                    if (usedspace > 0) {
		                        /* Begin padding with a 1 bit: */
          26                            context->buffer[usedspace++] = 0x80;
		
          26                            if (usedspace <= SHA256_SHORT_BLOCK_LENGTH) {
		                                /* Set-up for the last transform: */
          26                                    MEMSET_BZERO(&context->buffer[usedspace], SHA256_SHORT_BLOCK_LENGTH - usedspace);
		                        } else {
      ######                                    if (usedspace < SHA256_BLOCK_LENGTH) {
      ######                                            MEMSET_BZERO(&context->buffer[usedspace], SHA256_BLOCK_LENGTH - usedspace);
		                                }
		                                /* Do second-to-last transform: */
      ######                                    SHA256_Transform(context, (sha2_word32*)context->buffer);
		
		                                /* And set-up for the last transform: */
      ######                                    MEMSET_BZERO(context->buffer, SHA256_SHORT_BLOCK_LENGTH);
		                        }
		                } else {
		                        /* Set-up for the last transform: */
       36619                            MEMSET_BZERO(context->buffer, SHA256_SHORT_BLOCK_LENGTH);
		
		                        /* Begin padding with a 1 bit: */
       36619                            *context->buffer = 0x80;
		                }
		                /* Set the bit count: */
       36645                    *(sha2_word64*)&context->buffer[SHA256_SHORT_BLOCK_LENGTH] = context->bitcount;
		
		                /* Final transform: */
       36645                    SHA256_Transform(context, (sha2_word32*)context->buffer);
		
		#if !APR_IS_BIGENDIAN
		                {
		                        /* Convert TO host byte order */
       36645                            int     j;
      329805                            for (j = 0; j < 8; j++) {
      293160                                    REVERSE32(context->state[j],context->state[j]);
      293160                                    *d++ = context->state[j];
		                        }
		                }
		#else
		                MEMCPY_BCOPY(d, context->state, SHA256_DIGEST_LENGTH);
		#endif
		        }
		
		        /* Clean up state data: */
       36645            MEMSET_BZERO(context, sizeof(context));
       36645            usedspace = 0;
		}
		
      ######    char *SHA256_End(SHA256_CTX* context, char buffer[]) {
      ######            sha2_byte       digest[SHA256_DIGEST_LENGTH], *d = digest;
      ######            int             i;
		
		        /* Sanity check: */
      ######            assert(context != (SHA256_CTX*)0);
		
      ######            if (buffer != (char*)0) {
      ######                    SHA256_Final(digest, context);
		
      ######                    for (i = 0; i < SHA256_DIGEST_LENGTH; i++) {
      ######                            *buffer++ = sha2_hex_digits[(*d & 0xf0) >> 4];
      ######                            *buffer++ = sha2_hex_digits[*d & 0x0f];
      ######                            d++;
		                }
      ######                    *buffer = (char)0;
		        } else {
      ######                    MEMSET_BZERO(context, sizeof(context));
		        }
      ######            MEMSET_BZERO(digest, SHA256_DIGEST_LENGTH);
      ######            return buffer;
		}
		
      ######    char* SHA256_Data(const sha2_byte* data, size_t len, char digest[SHA256_DIGEST_STRING_LENGTH]) {
      ######            SHA256_CTX      context;
		
      ######            SHA256_Init(&context);
      ######            SHA256_Update(&context, data, len);
      ######            return SHA256_End(&context, digest);
		}
		
		
		/*** SHA-512: *********************************************************/
      ######    void SHA512_Init(SHA512_CTX* context) {
      ######            if (context == (SHA512_CTX*)0) {
      ######                    return;
		        }
      ######            MEMCPY_BCOPY(context->state, sha512_initial_hash_value, SHA512_DIGEST_LENGTH);
      ######            MEMSET_BZERO(context->buffer, SHA512_BLOCK_LENGTH);
      ######            context->bitcount[0] = context->bitcount[1] =  0;
		}
		
		#ifdef SHA2_UNROLL_TRANSFORM
		
		/* Unrolled SHA-512 round macros: */
		#if !APR_IS_BIGENDIAN
		
		#define ROUND512_0_TO_15(a,b,c,d,e,f,g,h)       \
		        REVERSE64(*data++, W512[j]); \
		        T1 = (h) + Sigma1_512(e) + Ch((e), (f), (g)) + \
		             K512[j] + W512[j]; \
		        (d) += T1, \
		        (h) = T1 + Sigma0_512(a) + Maj((a), (b), (c)), \
		        j++
		
		
		#else /* APR_IS_BIGENDIAN */
		
		#define ROUND512_0_TO_15(a,b,c,d,e,f,g,h)       \
		        T1 = (h) + Sigma1_512(e) + Ch((e), (f), (g)) + \
		             K512[j] + (W512[j] = *data++); \
		        (d) += T1; \
		        (h) = T1 + Sigma0_512(a) + Maj((a), (b), (c)); \
		        j++
		
		#endif /* APR_IS_BIGENDIAN */
		
		#define ROUND512(a,b,c,d,e,f,g,h)       \
		        s0 = W512[(j+1)&0x0f]; \
		        s0 = sigma0_512(s0); \
		        s1 = W512[(j+14)&0x0f]; \
		        s1 = sigma1_512(s1); \
		        T1 = (h) + Sigma1_512(e) + Ch((e), (f), (g)) + K512[j] + \
		             (W512[j&0x0f] += s1 + W512[(j+9)&0x0f] + s0); \
		        (d) += T1; \
		        (h) = T1 + Sigma0_512(a) + Maj((a), (b), (c)); \
		        j++
		
		void SHA512_Transform(SHA512_CTX* context, const sha2_word64* data) {
		        sha2_word64     a, b, c, d, e, f, g, h, s0, s1;
		        sha2_word64     T1, *W512 = (sha2_word64*)context->buffer;
		        int             j;
		
		        /* Initialize registers with the prev. intermediate value */
		        a = context->state[0];
		        b = context->state[1];
		        c = context->state[2];
		        d = context->state[3];
		        e = context->state[4];
		        f = context->state[5];
		        g = context->state[6];
		        h = context->state[7];
		
		        j = 0;
		        do {
		                ROUND512_0_TO_15(a,b,c,d,e,f,g,h);
		                ROUND512_0_TO_15(h,a,b,c,d,e,f,g);
		                ROUND512_0_TO_15(g,h,a,b,c,d,e,f);
		                ROUND512_0_TO_15(f,g,h,a,b,c,d,e);
		                ROUND512_0_TO_15(e,f,g,h,a,b,c,d);
		                ROUND512_0_TO_15(d,e,f,g,h,a,b,c);
		                ROUND512_0_TO_15(c,d,e,f,g,h,a,b);
		                ROUND512_0_TO_15(b,c,d,e,f,g,h,a);
		        } while (j < 16);
		
		        /* Now for the remaining rounds up to 79: */
		        do {
		                ROUND512(a,b,c,d,e,f,g,h);
		                ROUND512(h,a,b,c,d,e,f,g);
		                ROUND512(g,h,a,b,c,d,e,f);
		                ROUND512(f,g,h,a,b,c,d,e);
		                ROUND512(e,f,g,h,a,b,c,d);
		                ROUND512(d,e,f,g,h,a,b,c);
		                ROUND512(c,d,e,f,g,h,a,b);
		                ROUND512(b,c,d,e,f,g,h,a);
		        } while (j < 80);
		
		        /* Compute the current intermediate hash value */
		        context->state[0] += a;
		        context->state[1] += b;
		        context->state[2] += c;
		        context->state[3] += d;
		        context->state[4] += e;
		        context->state[5] += f;
		        context->state[6] += g;
		        context->state[7] += h;
		
		        /* Clean up */
		        a = b = c = d = e = f = g = h = T1 = 0;
		}
		
		#else /* SHA2_UNROLL_TRANSFORM */
		
      ######    void SHA512_Transform(SHA512_CTX* context, const sha2_word64* data) {
      ######            sha2_word64     a, b, c, d, e, f, g, h, s0, s1;
      ######            sha2_word64     T1, T2, *W512 = (sha2_word64*)context->buffer;
      ######            int             j;
		
		        /* Initialize registers with the prev. intermediate value */
      ######            a = context->state[0];
      ######            b = context->state[1];
      ######            c = context->state[2];
      ######            d = context->state[3];
      ######            e = context->state[4];
      ######            f = context->state[5];
      ######            g = context->state[6];
      ######            h = context->state[7];
		
      ######            j = 0;
      ######            do {
		#if !APR_IS_BIGENDIAN
		                /* Convert TO host byte order */
      ######                    REVERSE64(*data++, W512[j]);
		                /* Apply the SHA-512 compression function to update a..h */
      ######                    T1 = h + Sigma1_512(e) + Ch(e, f, g) + K512[j] + W512[j];
		#else /* APR_IS_BIGENDIAN */
		                /* Apply the SHA-512 compression function to update a..h with copy */
		                T1 = h + Sigma1_512(e) + Ch(e, f, g) + K512[j] + (W512[j] = *data++);
		#endif /* APR_IS_BIGENDIAN */
      ######                    T2 = Sigma0_512(a) + Maj(a, b, c);
      ######                    h = g;
      ######                    g = f;
      ######                    f = e;
      ######                    e = d + T1;
      ######                    d = c;
      ######                    c = b;
      ######                    b = a;
      ######                    a = T1 + T2;
		
      ######                    j++;
      ######            } while (j < 16);
		
      ######            do {
		                /* Part of the message block expansion: */
      ######                    s0 = W512[(j+1)&0x0f];
      ######                    s0 = sigma0_512(s0);
      ######                    s1 = W512[(j+14)&0x0f];
      ######                    s1 =  sigma1_512(s1);
		
		                /* Apply the SHA-512 compression function to update a..h */
      ######                    T1 = h + Sigma1_512(e) + Ch(e, f, g) + K512[j] +
		                     (W512[j&0x0f] += s1 + W512[(j+9)&0x0f] + s0);
      ######                    T2 = Sigma0_512(a) + Maj(a, b, c);
      ######                    h = g;
      ######                    g = f;
      ######                    f = e;
      ######                    e = d + T1;
      ######                    d = c;
      ######                    c = b;
      ######                    b = a;
      ######                    a = T1 + T2;
		
      ######                    j++;
      ######            } while (j < 80);
		
		        /* Compute the current intermediate hash value */
      ######            context->state[0] += a;
      ######            context->state[1] += b;
      ######            context->state[2] += c;
      ######            context->state[3] += d;
      ######            context->state[4] += e;
      ######            context->state[5] += f;
      ######            context->state[6] += g;
      ######            context->state[7] += h;
		
		        /* Clean up */
      ######            a = b = c = d = e = f = g = h = T1 = T2 = 0;
		}
		
		#endif /* SHA2_UNROLL_TRANSFORM */
		
      ######    void SHA512_Update(SHA512_CTX* context, const sha2_byte *data, size_t len) {
      ######            unsigned int    freespace, usedspace;
		
      ######            if (len == 0) {
		                /* Calling with no data is valid - we do nothing */
      ######                    return;
		        }
		
		        /* Sanity check: */
      ######            assert(context != (SHA512_CTX*)0 && data != (sha2_byte*)0);
		
      ######            usedspace = (context->bitcount[0] >> 3) % SHA512_BLOCK_LENGTH;
      ######            if (usedspace > 0) {
		                /* Calculate how much free space is available in the buffer */
      ######                    freespace = SHA512_BLOCK_LENGTH - usedspace;
		
      ######                    if (len >= freespace) {
		                        /* Fill the buffer completely and process it */
      ######                            MEMCPY_BCOPY(&context->buffer[usedspace], data, freespace);
      ######                            ADDINC128(context->bitcount, freespace << 3);
      ######                            len -= freespace;
      ######                            data += freespace;
      ######                            SHA512_Transform(context, (sha2_word64*)context->buffer);
		                } else {
		                        /* The buffer is not yet full */
      ######                            MEMCPY_BCOPY(&context->buffer[usedspace], data, len);
      ######                            ADDINC128(context->bitcount, len << 3);
		                        /* Clean up: */
      ######                            usedspace = freespace = 0;
      ######                            return;
		                }
		        }
      ######            while (len >= SHA512_BLOCK_LENGTH) {
		                /* Process as many complete blocks as we can */
      ######                    SHA512_Transform(context, (sha2_word64*)data);
      ######                    ADDINC128(context->bitcount, SHA512_BLOCK_LENGTH << 3);
      ######                    len -= SHA512_BLOCK_LENGTH;
      ######                    data += SHA512_BLOCK_LENGTH;
		        }
      ######            if (len > 0) {
		                /* There's left-overs, so save 'em */
      ######                    MEMCPY_BCOPY(context->buffer, data, len);
      ######                    ADDINC128(context->bitcount, len << 3);
		        }
		        /* Clean up: */
      ######            usedspace = freespace = 0;
		}
		
      ######    void SHA512_Last(SHA512_CTX* context) {
      ######            unsigned int    usedspace;
		
      ######            usedspace = (context->bitcount[0] >> 3) % SHA512_BLOCK_LENGTH;
		#if !APR_IS_BIGENDIAN
		        /* Convert FROM host byte order */
      ######            REVERSE64(context->bitcount[0],context->bitcount[0]);
      ######            REVERSE64(context->bitcount[1],context->bitcount[1]);
		#endif
      ######            if (usedspace > 0) {
		                /* Begin padding with a 1 bit: */
      ######                    context->buffer[usedspace++] = 0x80;
		
      ######                    if (usedspace <= SHA512_SHORT_BLOCK_LENGTH) {
		                        /* Set-up for the last transform: */
      ######                            MEMSET_BZERO(&context->buffer[usedspace], SHA512_SHORT_BLOCK_LENGTH - usedspace);
		                } else {
      ######                            if (usedspace < SHA512_BLOCK_LENGTH) {
      ######                                    MEMSET_BZERO(&context->buffer[usedspace], SHA512_BLOCK_LENGTH - usedspace);
		                        }
		                        /* Do second-to-last transform: */
      ######                            SHA512_Transform(context, (sha2_word64*)context->buffer);
		
		                        /* And set-up for the last transform: */
      ######                            MEMSET_BZERO(context->buffer, SHA512_BLOCK_LENGTH - 2);
		                }
		        } else {
		                /* Prepare for final transform: */
      ######                    MEMSET_BZERO(context->buffer, SHA512_SHORT_BLOCK_LENGTH);
		
		                /* Begin padding with a 1 bit: */
      ######                    *context->buffer = 0x80;
		        }
		        /* Store the length of input data (in bits): */
      ######            *(sha2_word64*)&context->buffer[SHA512_SHORT_BLOCK_LENGTH] = context->bitcount[1];
      ######            *(sha2_word64*)&context->buffer[SHA512_SHORT_BLOCK_LENGTH+8] = context->bitcount[0];
		
		        /* Final transform: */
      ######            SHA512_Transform(context, (sha2_word64*)context->buffer);
		}
		
      ######    void SHA512_Final(sha2_byte digest[], SHA512_CTX* context) {
      ######            sha2_word64     *d = (sha2_word64*)digest;
		
		        /* Sanity check: */
      ######            assert(context != (SHA512_CTX*)0);
		
		        /* If no digest buffer is passed, we don't bother doing this: */
      ######            if (digest != (sha2_byte*)0) {
      ######                    SHA512_Last(context);
		
		                /* Save the hash data for output: */
		#if !APR_IS_BIGENDIAN
		                {
		                        /* Convert TO host byte order */
      ######                            int     j;
      ######                            for (j = 0; j < 8; j++) {
      ######                                    REVERSE64(context->state[j],context->state[j]);
      ######                                    *d++ = context->state[j];
		                        }
		                }
		#else /* APR_IS_BIGENDIAN */
		                MEMCPY_BCOPY(d, context->state, SHA512_DIGEST_LENGTH);
		#endif /* APR_IS_BIGENDIAN */
		        }
		
		        /* Zero out state data */
      ######            MEMSET_BZERO(context, sizeof(context));
		}
		
      ######    char *SHA512_End(SHA512_CTX* context, char buffer[]) {
      ######            sha2_byte       digest[SHA512_DIGEST_LENGTH], *d = digest;
      ######            int             i;
		
		        /* Sanity check: */
      ######            assert(context != (SHA512_CTX*)0);
		
      ######            if (buffer != (char*)0) {
      ######                    SHA512_Final(digest, context);
		
      ######                    for (i = 0; i < SHA512_DIGEST_LENGTH; i++) {
      ######                            *buffer++ = sha2_hex_digits[(*d & 0xf0) >> 4];
      ######                            *buffer++ = sha2_hex_digits[*d & 0x0f];
      ######                            d++;
		                }
      ######                    *buffer = (char)0;
		        } else {
      ######                    MEMSET_BZERO(context, sizeof(context));
		        }
      ######            MEMSET_BZERO(digest, SHA512_DIGEST_LENGTH);
      ######            return buffer;
		}
		
      ######    char* SHA512_Data(const sha2_byte* data, size_t len, char digest[SHA512_DIGEST_STRING_LENGTH]) {
      ######            SHA512_CTX      context;
		
      ######            SHA512_Init(&context);
      ######            SHA512_Update(&context, data, len);
      ######            return SHA512_End(&context, digest);
		}
		
		
		/*** SHA-384: *********************************************************/
      ######    void SHA384_Init(SHA384_CTX* context) {
      ######            if (context == (SHA384_CTX*)0) {
      ######                    return;
		        }
      ######            MEMCPY_BCOPY(context->state, sha384_initial_hash_value, SHA512_DIGEST_LENGTH);
      ######            MEMSET_BZERO(context->buffer, SHA384_BLOCK_LENGTH);
      ######            context->bitcount[0] = context->bitcount[1] = 0;
		}
		
      ######    void SHA384_Update(SHA384_CTX* context, const sha2_byte* data, size_t len) {
      ######            SHA512_Update((SHA512_CTX*)context, data, len);
		}
		
      ######    void SHA384_Final(sha2_byte digest[], SHA384_CTX* context) {
      ######            sha2_word64     *d = (sha2_word64*)digest;
		
		        /* Sanity check: */
      ######            assert(context != (SHA384_CTX*)0);
		
		        /* If no digest buffer is passed, we don't bother doing this: */
      ######            if (digest != (sha2_byte*)0) {
      ######                    SHA512_Last((SHA512_CTX*)context);
		
		                /* Save the hash data for output: */
		#if !APR_IS_BIGENDIAN
		                {
		                        /* Convert TO host byte order */
      ######                            int     j;
      ######                            for (j = 0; j < 6; j++) {
      ######                                    REVERSE64(context->state[j],context->state[j]);
      ######                                    *d++ = context->state[j];
		                        }
		                }
		#else /* APR_IS_BIGENDIAN */
		                MEMCPY_BCOPY(d, context->state, SHA384_DIGEST_LENGTH);
		#endif /* APR_IS_BIGENDIAN */
		        }
		
		        /* Zero out state data */
      ######            MEMSET_BZERO(context, sizeof(context));
		}
		
      ######    char *SHA384_End(SHA384_CTX* context, char buffer[]) {
      ######            sha2_byte       digest[SHA384_DIGEST_LENGTH], *d = digest;
      ######            int             i;
		
		        /* Sanity check: */
      ######            assert(context != (SHA384_CTX*)0);
		
      ######            if (buffer != (char*)0) {
      ######                    SHA384_Final(digest, context);
		
      ######                    for (i = 0; i < SHA384_DIGEST_LENGTH; i++) {
      ######                            *buffer++ = sha2_hex_digits[(*d & 0xf0) >> 4];
      ######                            *buffer++ = sha2_hex_digits[*d & 0x0f];
      ######                            d++;
		                }
      ######                    *buffer = (char)0;
		        } else {
      ######                    MEMSET_BZERO(context, sizeof(context));
		        }
      ######            MEMSET_BZERO(digest, SHA384_DIGEST_LENGTH);
      ######            return buffer;
		}
		
      ######    char* SHA384_Data(const sha2_byte* data, size_t len, char digest[SHA384_DIGEST_STRING_LENGTH]) {
      ######            SHA384_CTX      context;
		
      ######            SHA384_Init(&context);
      ######            SHA384_Update(&context, data, len);
      ######            return SHA384_End(&context, digest);
		}
		
