Apache Portable Runtime
|
Modules | |
Socket option definitions | |
IP Protocol Definitions for use when creating sockets | |
IP Multicast | |
Data Structures | |
struct | in_addr |
struct | apr_sockaddr_t |
struct | apr_hdtr_t |
Macros | |
#define | APR_MAX_SECS_TO_LINGER 30 |
#define | APRMAXHOSTLEN 256 |
#define | APR_ANYADDR "0.0.0.0" |
#define | APR_IPV4_ADDR_OK 0x01 |
#define | APR_IPV6_ADDR_OK 0x02 |
#define | APR_INADDR_NONE ((unsigned int) 0xffffffff) |
#define | APR_INET AF_INET |
#define | APR_UNSPEC 0 |
#define | APR_UNIX 1234 |
Typedefs | |
typedef struct apr_socket_t | apr_socket_t |
typedef struct apr_hdtr_t | apr_hdtr_t |
typedef struct in_addr | apr_in_addr_t |
typedef struct apr_ipsubnet_t | apr_ipsubnet_t |
typedef apr_uint16_t | apr_port_t |
typedef struct apr_sockaddr_t | apr_sockaddr_t |
Enumerations | |
enum | apr_shutdown_how_e { APR_SHUTDOWN_READ, APR_SHUTDOWN_WRITE, APR_SHUTDOWN_READWRITE } |
enum | apr_interface_e { APR_LOCAL, APR_REMOTE } |
#define APR_ANYADDR "0.0.0.0" |
Default 'any' address
#define APR_INADDR_NONE ((unsigned int) 0xffffffff) |
Not all platforms have a real INADDR_NONE. This macro replaces INADDR_NONE on all platforms.
#define APR_INET AF_INET |
Not all platforms have these defined, so we'll define them here The default values come from FreeBSD 4.1.1
#define APR_IPV4_ADDR_OK 0x01 |
#define APR_IPV6_ADDR_OK 0x02 |
#define APR_MAX_SECS_TO_LINGER 30 |
Maximum seconds to linger
#define APR_UNSPEC 0 |
Let the system decide which address family to use
#define APRMAXHOSTLEN 256 |
Maximum hostname length
typedef struct apr_hdtr_t apr_hdtr_t |
A structure to encapsulate headers and trailers for apr_socket_sendfile
typedef struct in_addr apr_in_addr_t |
A structure to represent in_addr
typedef struct apr_ipsubnet_t apr_ipsubnet_t |
A structure to represent an IP subnet
typedef apr_uint16_t apr_port_t |
typedef struct apr_sockaddr_t apr_sockaddr_t |
typedef struct apr_socket_t apr_socket_t |
The specific declaration of inet_addr's ... some platforms fall back inet_network (this is not good, but necessary)A structure to represent sockets
enum apr_interface_e |
enum apr_shutdown_how_e |
apr_status_t apr_gethostname | ( | char * | buf, |
int | len, | ||
apr_pool_t * | cont | ||
) |
Get name of the current machine
buf | A buffer to store the hostname in. |
len | The maximum length of the hostname that can be stored in the buffer provided. The suggested length is APRMAXHOSTLEN + 1. |
cont | The pool to use. |
apr_status_t apr_getnameinfo | ( | char ** | hostname, |
apr_sockaddr_t * | sa, | ||
apr_int32_t | flags | ||
) |
Look up the host name from an apr_sockaddr_t.
hostname | The hostname. |
sa | The apr_sockaddr_t. |
flags | Special processing flags. |
apr_status_t apr_getservbyname | ( | apr_sockaddr_t * | sockaddr, |
const char * | servname | ||
) |
Given an apr_sockaddr_t and a service name, set the port for the service
sockaddr | The apr_sockaddr_t that will have its port set |
servname | The name of the service you wish to use |
apr_status_t apr_ipsubnet_create | ( | apr_ipsubnet_t ** | ipsub, |
const char * | ipstr, | ||
const char * | mask_or_numbits, | ||
apr_pool_t * | p | ||
) |
Build an ip-subnet representation from an IP address and optional netmask or number-of-bits.
ipsub | The new ip-subnet representation |
ipstr | The input IP address string |
mask_or_numbits | The input netmask or number-of-bits string, or NULL |
p | The pool to allocate from |
int apr_ipsubnet_test | ( | apr_ipsubnet_t * | ipsub, |
apr_sockaddr_t * | sa | ||
) |
Test the IP address in an apr_sockaddr_t against a pre-built ip-subnet representation.
ipsub | The ip-subnet representation |
sa | The socket address to test |
apr_status_t apr_parse_addr_port | ( | char ** | addr, |
char ** | scope_id, | ||
apr_port_t * | port, | ||
const char * | str, | ||
apr_pool_t * | p | ||
) |
Parse hostname/IP address with scope id and port.
Any of the following strings are accepted: 8080 (just the port number) www.apache.org (just the hostname) www.apache.org:8080 (hostname and port number)
[fe80::1eth0] (IPv6 numeric address string and scope id)
Invalid strings: (empty string) [abc] (not valid IPv6 numeric address string) abc:65536 (invalid port number)
addr | The new buffer containing just the hostname. On output, *addr will be NULL if no hostname/IP address was specfied. |
scope_id | The new buffer containing just the scope id. On output, *scope_id will be NULL if no scope id was specified. |
port | The port number. On output, *port will be 0 if no port was specified. FIXME: 0 is a legal port (per RFC 1700). this should |
str | The input string to be parsed. |
p | The pool from which *addr and *scope_id are allocated. |
APR_PERMS_SET_IMPLEMENT | ( | socket | ) |
Set socket permissions.
int apr_sockaddr_equal | ( | const apr_sockaddr_t * | addr1, |
const apr_sockaddr_t * | addr2 | ||
) |
See if the IP addresses in two APR socket addresses are equivalent. Appropriate logic is present for comparing IPv4-mapped IPv6 addresses with IPv4 addresses.
addr1 | One of the APR socket addresses. |
addr2 | The other APR socket address. |
apr_status_t apr_sockaddr_info_copy | ( | apr_sockaddr_t ** | dst, |
const apr_sockaddr_t * | src, | ||
apr_pool_t * | p | ||
) |
Copy apr_sockaddr_t src to dst on pool p.
dst | The destination apr_sockaddr_t. |
src | The source apr_sockaddr_t. |
p | The pool for the apr_sockaddr_t and associated storage. |
apr_status_t apr_sockaddr_info_get | ( | apr_sockaddr_t ** | sa, |
const char * | hostname, | ||
apr_int32_t | family, | ||
apr_port_t | port, | ||
apr_int32_t | flags, | ||
apr_pool_t * | p | ||
) |
Create apr_sockaddr_t from hostname, address family, and port.
sa | The new apr_sockaddr_t. |
hostname | The hostname or numeric address string to resolve/parse, or NULL to build an address that corresponds to 0.0.0.0 or :: or in case of APR_UNIX family it is absolute socket filename. |
family | The address family to use, or APR_UNSPEC if the system should decide. |
port | The port number. |
flags | Special processing flags: APR_IPV4_ADDR_OK first query for IPv4 addresses; only look for IPv6 addresses if the first query failed; only valid if family is APR_UNSPEC and hostname isn't NULL; mutually exclusive with APR_IPV6_ADDR_OK APR_IPV6_ADDR_OK first query for IPv6 addresses; only look for IPv4 addresses if the first query failed; only valid if family is APR_UNSPEC and hostname isn't NULL and APR_HAVE_IPV6; mutually exclusive with APR_IPV4_ADDR_OK |
p | The pool for the apr_sockaddr_t and associated storage. |
apr_status_t apr_sockaddr_ip_get | ( | char ** | addr, |
apr_sockaddr_t * | sockaddr | ||
) |
Return the IP address (in numeric address string format) in an APR socket address. APR will allocate storage for the IP address string from the pool of the apr_sockaddr_t.
addr | The IP address. |
sockaddr | The socket address to reference. |
apr_status_t apr_sockaddr_ip_getbuf | ( | char * | buf, |
apr_size_t | buflen, | ||
apr_sockaddr_t * | sockaddr | ||
) |
Write the IP address (in numeric address string format) of the APR socket address sockaddr into the buffer buf (of size buflen).
sockaddr | The socket address to reference. |
int apr_sockaddr_is_wildcard | ( | const apr_sockaddr_t * | addr | ) |
See if the IP address in an APR socket address refers to the wildcard address for the protocol family (e.g., INADDR_ANY for IPv4).
addr | The APR socket address to examine. |
apr_status_t apr_socket_accept | ( | apr_socket_t ** | new_sock, |
apr_socket_t * | sock, | ||
apr_pool_t * | connection_pool | ||
) |
Accept a new connection request
new_sock | A copy of the socket that is connected to the socket that made the connection request. This is the socket which should be used for all future communication. |
sock | The socket we are listening on. |
connection_pool | The pool for the new socket. |
apr_status_t apr_socket_accept_filter | ( | apr_socket_t * | sock, |
const char * | name, | ||
const char * | args | ||
) |
Set an OS level accept filter.
sock | The socket to put the accept filter on. |
name | The accept filter |
args | Any extra args to the accept filter. Passing NULL here removes the accept filter. |
apr_status_t apr_socket_addr_get | ( | apr_sockaddr_t ** | sa, |
apr_interface_e | which, | ||
apr_socket_t * | sock | ||
) |
Return an address associated with a socket; either the address to which the socket is bound locally or the address of the peer to which the socket is connected.
sa | The returned apr_sockaddr_t. |
which | Whether to retrieve the local or remote address |
sock | The socket to use |
apr_status_t apr_socket_atmark | ( | apr_socket_t * | sock, |
int * | atmark | ||
) |
Query the specified socket if at the OOB/Urgent data mark
sock | The socket to query |
atmark | Is set to true if socket is at the OOB/urgent mark, otherwise is set to false. |
apr_status_t apr_socket_atreadeof | ( | apr_socket_t * | sock, |
int * | atreadeof | ||
) |
Determine whether the receive part of the socket has been closed by the peer (such that a subsequent call to apr_socket_read would return APR_EOF), if the socket's receive buffer is empty. This function does not block waiting for I/O.
sock | The socket to check |
atreadeof | If APR_SUCCESS is returned, *atreadeof is set to non-zero if a subsequent read would return APR_EOF |
apr_status_t apr_socket_bind | ( | apr_socket_t * | sock, |
apr_sockaddr_t * | sa | ||
) |
Bind the socket to its associated port
sock | The socket to bind |
sa | The socket address to bind to |
apr_status_t apr_socket_close | ( | apr_socket_t * | thesocket | ) |
Close a socket.
thesocket | The socket to close |
apr_status_t apr_socket_connect | ( | apr_socket_t * | sock, |
apr_sockaddr_t * | sa | ||
) |
Issue a connection request to a socket either on the same machine or a different one.
sock | The socket we wish to use for our side of the connection |
sa | The address of the machine we wish to connect to. |
apr_status_t apr_socket_create | ( | apr_socket_t ** | new_sock, |
int | family, | ||
int | type, | ||
int | protocol, | ||
apr_pool_t * | cont | ||
) |
Create a socket.
new_sock | The new socket that has been set up. |
family | The address family of the socket (e.g., APR_INET). |
type | The type of the socket (e.g., SOCK_STREAM). |
protocol | The protocol of the socket (e.g., APR_PROTO_TCP). |
cont | The pool for the apr_socket_t and associated storage. |
apr_status_t apr_socket_data_get | ( | void ** | data, |
const char * | key, | ||
apr_socket_t * | sock | ||
) |
Return the data associated with the current socket
data | The user data associated with the socket. |
key | The key to associate with the user data. |
sock | The currently open socket. |
apr_status_t apr_socket_data_set | ( | apr_socket_t * | sock, |
void * | data, | ||
const char * | key, | ||
apr_status_t(*)(void *) | cleanup | ||
) |
Set the data associated with the current socket.
sock | The currently open socket. |
data | The user data to associate with the socket. |
key | The key to associate with the data. |
cleanup | The cleanup to call when the socket is destroyed. |
apr_status_t apr_socket_inherit_set | ( | apr_socket_t * | thesocket | ) |
Set a socket to be inherited by child processes.
apr_status_t apr_socket_inherit_unset | ( | apr_socket_t * | thesocket | ) |
Unset a socket from being inherited by child processes.
apr_status_t apr_socket_listen | ( | apr_socket_t * | sock, |
apr_int32_t | backlog | ||
) |
Listen to a bound socket for connections.
sock | The socket to listen on |
backlog | The number of outstanding connections allowed in the sockets listen queue. If this value is less than zero, the listen queue size is set to zero. |
apr_status_t apr_socket_opt_get | ( | apr_socket_t * | sock, |
apr_int32_t | opt, | ||
apr_int32_t * | on | ||
) |
Query socket options for the specified socket
sock | The socket to query |
opt | The option we would like to query. One of: APR_SO_DEBUG -- turn on debugging information APR_SO_KEEPALIVE -- keep connections active APR_SO_LINGER -- lingers on close if data is present APR_SO_NONBLOCK -- Turns blocking on/off for socket APR_SO_REUSEADDR -- The rules used in validating addresses supplied to bind should allow reuse of local addresses. APR_SO_SNDBUF -- Set the SendBufferSize APR_SO_RCVBUF -- Set the ReceiveBufferSize APR_SO_DISCONNECTED -- Query the disconnected state of the socket. (Currently only used on Windows) |
on | Socket option returned on the call. |
apr_status_t apr_socket_opt_set | ( | apr_socket_t * | sock, |
apr_int32_t | opt, | ||
apr_int32_t | on | ||
) |
Setup socket options for the specified socket
sock | The socket to set up. |
opt | The option we would like to configure. One of: APR_SO_DEBUG -- turn on debugging information APR_SO_KEEPALIVE -- keep connections active APR_SO_LINGER -- lingers on close if data is present APR_SO_NONBLOCK -- Turns blocking on/off for socket When this option is enabled, use the APR_STATUS_IS_EAGAIN() macro to see if a send or receive function could not transfer data without blocking. APR_SO_REUSEADDR -- The rules used in validating addresses supplied to bind should allow reuse of local addresses. APR_SO_SNDBUF -- Set the SendBufferSize APR_SO_RCVBUF -- Set the ReceiveBufferSize APR_SO_FREEBIND -- Allow binding to non-local IP address. |
on | Value for the option. |
apr_pool_t* apr_socket_pool_get | ( | const apr_socket_t * | thesocket | ) |
Get the pool used by the socket.
apr_status_t apr_socket_protocol_get | ( | apr_socket_t * | sock, |
int * | protocol | ||
) |
Return the protocol of the socket.
sock | The socket to query. |
protocol | The returned protocol (e.g., APR_PROTO_TCP). |
apr_status_t apr_socket_recv | ( | apr_socket_t * | sock, |
char * | buf, | ||
apr_size_t * | len | ||
) |
Read data from a network.
sock | The socket to read the data from. |
buf | The buffer to store the data in. |
len | On entry, the number of bytes to receive; on exit, the number of bytes received. |
This functions acts like a blocking read by default. To change this behavior, use apr_socket_timeout_set() or the APR_SO_NONBLOCK socket option. The number of bytes actually received is stored in argument 3.
It is possible for both bytes to be received and an APR_EOF or other error to be returned.
APR_EINTR is never returned.
apr_status_t apr_socket_recvfrom | ( | apr_sockaddr_t * | from, |
apr_socket_t * | sock, | ||
apr_int32_t | flags, | ||
char * | buf, | ||
apr_size_t * | len | ||
) |
Read data from a socket. On success, the address of the peer from which the data was sent is copied into the from parameter, and the len parameter is updated to give the number of bytes written to buf.
from | Updated with the address from which the data was received |
sock | The socket to use |
flags | The flags to use |
buf | The buffer to use |
len | The length of the available buffer |
apr_status_t apr_socket_send | ( | apr_socket_t * | sock, |
const char * | buf, | ||
apr_size_t * | len | ||
) |
Send data over a network.
sock | The socket to send the data over. |
buf | The buffer which contains the data to be sent. |
len | On entry, the number of bytes to send; on exit, the number of bytes sent. |
This functions acts like a blocking write by default. To change this behavior, use apr_socket_timeout_set() or the APR_SO_NONBLOCK socket option.
It is possible for both bytes to be sent and an error to be returned.
APR_EINTR is never returned.
apr_status_t apr_socket_sendfile | ( | apr_socket_t * | sock, |
apr_file_t * | file, | ||
apr_hdtr_t * | hdtr, | ||
apr_off_t * | offset, | ||
apr_size_t * | len, | ||
apr_int32_t | flags | ||
) |
Send a file from an open file descriptor to a socket, along with optional headers and trailers
sock | The socket to which we're writing |
file | The open file from which to read |
hdtr | A structure containing the headers and trailers to send |
offset | Offset into the file where we should begin writing |
len | (input) - Number of bytes to send from the file (output) - Number of bytes actually sent, including headers, file, and trailers |
flags | APR flags that are mapped to OS specific flags |
apr_status_t apr_socket_sendto | ( | apr_socket_t * | sock, |
apr_sockaddr_t * | where, | ||
apr_int32_t | flags, | ||
const char * | buf, | ||
apr_size_t * | len | ||
) |
sock | The socket to send from |
where | The apr_sockaddr_t describing where to send the data |
flags | The flags to use |
buf | The data to send |
len | The length of the data to send |
apr_status_t apr_socket_sendv | ( | apr_socket_t * | sock, |
const struct iovec * | vec, | ||
apr_int32_t | nvec, | ||
apr_size_t * | len | ||
) |
Send multiple buffers over a network.
sock | The socket to send the data over. |
vec | The array of iovec structs containing the data to send |
nvec | The number of iovec structs in the array |
len | Receives the number of bytes actually written |
This functions acts like a blocking write by default. To change this behavior, use apr_socket_timeout_set() or the APR_SO_NONBLOCK socket option. The number of bytes actually sent is stored in argument 4.
It is possible for both bytes to be sent and an error to be returned.
APR_EINTR is never returned.
apr_status_t apr_socket_shutdown | ( | apr_socket_t * | thesocket, |
apr_shutdown_how_e | how | ||
) |
Shutdown either reading, writing, or both sides of a socket.
thesocket | The socket to close |
how | How to shutdown the socket. One of: APR_SHUTDOWN_READ no longer allow read requests APR_SHUTDOWN_WRITE no longer allow write requests APR_SHUTDOWN_READWRITE no longer allow read or write requests |
apr_status_t apr_socket_timeout_get | ( | apr_socket_t * | sock, |
apr_interval_time_t * | t | ||
) |
Query socket timeout for the specified socket
sock | The socket to query |
t | Socket timeout returned from the query. |
apr_status_t apr_socket_timeout_set | ( | apr_socket_t * | sock, |
apr_interval_time_t | t | ||
) |
Setup socket timeout for the specified socket
sock | The socket to set up. |
t | Value for the timeout. t > 0 – read and write calls return APR_TIMEUP if specified time elapsess with no data read or written t == 0 – read and write calls never block t < 0 – read and write calls block |
apr_status_t apr_socket_type_get | ( | apr_socket_t * | sock, |
int * | type | ||
) |
Return the type of the socket.
sock | The socket to query. |
type | The returned type (e.g., SOCK_STREAM). |
apr_status_t apr_socket_wait | ( | apr_socket_t * | sock, |
apr_wait_type_t | direction | ||
) |
Wait for a socket to be ready for input or output
sock | the socket to wait on |
direction | whether to wait for reading or writing to be ready |